|
Go Back to |
|
John Deere G Stuff Looks like we need to get some better pictures.
John Deere G block. Patterned after a Styled Block, this block was made to look like the original F550R Block. Petcocks are fully functional and in Factory Location. Uses all stock hardware when ordered at 7” Bore Size. A clearancing Template is included to help clear the crankcase. Minimal grinding required at 7” Bore.
|
|
7” Stock Appearing Block* Pistons, Pins, Rings and the Block = $4400. * Also Available in Unstyled Block Length on Request
7.5” Bore Block* with pistons/pins/rings = $4400 * Also Available in Unstyled Block Length on Request
8.0” Bore Block* with pistons/pins/rings = $5500 * Also Available in lengths up to 14” long. This keeps the sleeves out of the crankcase to increase the strength of the crankcase. |
